Product Description

Original Autohex II BMW Lite Locksmith with HW4

Autohex II HW4 and the essential features needed to program BMW keys for E and F series, solving all cases including all keys lost

Using this kit you can do asfollowing:

a?? Read old ISN in BMW E series for following Ecus:D62M57A0, ?D62M57B0, ?D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, ?
N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, ?N62_TUE2.

a?? Read Long ISN (SK) in BMW E series from following Ecus: ?MSV80, ?MSD80, ?MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, ?
MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, ?
D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0

a?? Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725,?N63TU_L0, N63TU_R0, ?S63TU_L0, ?S63TU_R0
a?? Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
a?? CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK
a?? Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
a?? Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
a?? Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
a?? Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM
a?? ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
a?? Read ISN of MSD85, MSD87, MSV90 in F series.
a?? ECU Cloning/Tuning for a wide range of brands. This function is free for 90 days ?(Check Supported ECU List).
a?? Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
a?? Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool.
a?? Modify KOMBI Mileage by HexTag tool.
a?? Renew all BMW keys, and many other brands by HexTag tool.

Notice:
1. HexTag ECU Cloning Function is free for 90 days only.
After 90 Days, ECU Cloning License will cost $1000, and $350 for annual update fee.
2.?We offer one year warranty, while return for refund is not acceptable.

What you miss in this Kit:
BMW E Series, F Series and G Series online Ecu Programming and Manual coding?(can be ordered later)
Modify ISN/SK in DME, DDE and CAS by OBD?(can be ordered later)
Reset EGS 6HP/8HP EWS?(can be ordered later)
Ecu Coding, and Vehicle Order managing?(can be ordered later)
ISN Reading from Tricore Ecus by boot mode.?(can be ordered later)

Package List:

Autohex II Hardware WVCI HW4
The Powerful HexTag BDM and Key programmer.
BMW Software Lite Locksmith License
Key Programming License
BMW ISTA/D Driver to Run Dealer Software
1 Year Technical Support
1 Year Hardware Warranty

?