Global:    English  /  Русский  /  العربية  /  한국어  /  Português  /  日本の  /  Français  /  German
current   Home page  »  Company products
Opcom OP-Com 2014 V Can OBD2 Opel Firmware V1.45 With PIC18F458 Chip Support Firmware Update
Opcom OP-Com 2014 V Can OBD2 Opel Firmware V1.45 with PIC18F458 Chip Support Firmware Update
Opcom OP-Com 2014 V Can OBD2 Opel Firmware V1.45 With PIC18F458 Chip Support Firmware Update
  • Product Category : Car Diagnostic Tools
  • Item Number : KM5052
  • Product Model : No. SP105-C
  • Product Model : 400 g
  • Price : US$ 22.99
  • Integral : 22.99
  • Buy 3+ Special price US$ 22.6 each
  • Buy 5+ Special price US$ 22.3 each
  • Buy 10+ Special price US$ 22.0 each
add to the cart

Product introduction:
Opcom OP-Com 2014 V Can OBD2 Opel Firmware V1.45 with PIC18F458 chip

Picture of product appearance and accessories:
这里输入图片说明!这里输入图片说明!
这里输入图片说明!这里输入图片说明!
这里输入图片说明!这里输入图片说明!
这里输入图片说明!这里输入图片说明!
这里输入图片说明!这里输入图片说明!
这里输入图片说明!这里输入图片说明!
Software / Firmware Version:

 
Software Version: 
120309a
Firmware version: 1.45
 
OPCOM 2014 Function, Workable Vehicle and Control System:
 
OP-COM is a PC-based diagnostic program, it can read out and clear detailed fault codes, read live data, and perform output test on many control units (e.g. Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.) for almost all Opel cars even the new CAN-BUS protocol cars such as Vectra-C, Astra-H and Zafira-B, etc. 
Note:
Since Opel cars are built with many pins in the OBD connector, you need select the appropriate pin for communication with diagnostic interface:
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
 
 OPCOM 2014 Feature:
 
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes interface, you can go directly to the measuring blocks interface.
3) The program shows you measuring block information on many control module, but you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate mostly depends on the communication protocol. For example, the older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while the newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 
You can also run output tests on many controllers.
 
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
Package List:
 
1pc x   OP COM Interface
1pc x   USB Cable
1pc x   Software and Drivers CD

If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
Recommended products
  • DegeTools Pump  Air Wedge Airbag Tools,for windows install  4 pack
  • DegeTools Pump Air Wedge Airbag Tools,for Windows Install 4 Pack
  • opel ID40 chip carbon
  • Opel ID40 Chip Carbon
  • HOT KLOM Cordless Electric Lock Pick Gun Auto Lock Picks Tools Pick Guns Lockpicking Lock Pick Set Locksmith Tools
  • HOT KLOM Cordless Electric Lock Pick Gun Auto Lock Picks Tools Pick Guns Lockpicking Lock Pick Set Locksmith Tools
  • Lexus TOY48 3 button remote key shell(41mm)
  • Lexus TOY48 3 Button Remote Key Shell(41mm)