shopping cart
- Welcome visitor
- Your Cart is empty
by Category
Program Tools- Original Brand Tool
- Auto Key Programmer
- Car Diagnostic Tools
- ECU Chip Tunning
- Pincode reader
- Mileage Programmer
- Heavy Duty Diagnostic
- Airbag Reset Tool
- Hot Car Accessories
- OBD2 Code Scanner
Program Tools
CLONING TOOLS- Transponder Key Cloning Tools
CLONING TOOLS
Transponder Key- Maserati
- Great Wall
- Daihatsu
- Alfa Romeo
- TOYOTA
- HONDA
- Cadillac
- RENAULT
- ZHONGHUA
- Chrysler
- FIAT
- GM
- Mercedes-Benz
- Subaru
- Chevrolet
- Acura
- VOLKSWAGEN
- BYD
- Hyundai
- Peugeot
- Landrover
- LEXUS
- Skoda
- Citroen
- Seat
- Volvo
- Infiniti
- Dodge
- SUZUKI
- BMW
- Ford
- BUICK
- Porsche
- KIA
- Bentley
- Opel
- MITSUBISHI
- Proton
- AUDI
- Jaguar
- MAZDA
- NISSAN
- China Car
- SAAB
- Saipa
- Luxgen
- Motocycle
Transponder Key
Transponder Chip- Transponder Chips
- Motorcycle Key Chips
- Cloneable Chips
- Chip Package
Transponder Chip
Locksmith Tools- Key Cutting & Lock Pick Tool
- key cutting machine
- Key moulds & clamps
- Car Lock 2 in 1 picks
- LISHI 2 in 1 tools
- LISHI pick tools
- LISHI pick tools group
- Auto lock reed repair kits
- House lock pick
- Car Door open
- Spacing & Depth Keys
Locksmith Tools
CUTTING MACHINE- SEC-E9
- Kaida-Jinji
- WENXING Machine
- wenxing cutter
- keymam brand cutter
CUTTING MACHINE
Lock
KEYDIY- KeyDiy
- Keyblade for KeyDiy
KEYDIY
REMOTE MASTER- Remote Master
- Proximity card Copy Machine
- Selflearning Remote_315MHZ
- Remote Clone Expert
- Selflearning frequency adjustable
- Selflearning Remote_433MHZ
- key blade and logo
- Rolling Code Remote_315MHZ
- Rolling Code Remote_433MHZ
REMOTE MASTER
House Key Blanks- House Lock Key
House Key Blanks
Key Case Rubber- Auto Button Rubber
Key Case Rubber
OTHER PRODUCT
OTHER PRODUCTcurrent Home page » Company products
Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL With Single Layer PCB
Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL With Single Layer PCB
- Product Category : Car Diagnostic Tools
- Item Number : KM4960
- Product Model : No. SP105-E
- Product Model : 300 g
- Price : US$ 19.99
- Integral : 19.99
- Buy 3+ Special price US$ 19.5 each
- Buy 5+ Special price US$ 19.0 each
- Buy 10+ Special price US$ 18.5 each
Product introduction:
Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB
Picture of product appearance and accessories:
New OPCOM V1.7 Firmware 2010V Software Feature:
1. OPCOM is a special PC-based diagnostic interface especially for OPEL.
2. Software Version:2010/2014 Firmware Version: 1.7
3. DO NOT update opcom online; otherwise, the device would be damaged!
New OPCOM V1.70 Firmware 2010/2014V Software Function:
1. It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program allows users to read out and clear fault codes, shows you live data and perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
4. Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer,
and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all information available:
Full fault code text description:
1) Full status information (Present, Not present, Intermittent)
2) Users can print out, save, or copy the fault codes to any other application.
From the fault codes window, users can go directly to the measuring blocks window.
3) The program shows measuring block information on many control module, users can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously.
The sample rate is depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Users can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package includes:
1pc x OP COM Interface
1pc x USB Cable
1pc x Software and Drivers CD
If you have any problem, please do not hesitate to contact us.
Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
Picture of product appearance and accessories:
New OPCOM V1.7 Firmware 2010V Software Feature:
1. OPCOM is a special PC-based diagnostic interface especially for OPEL.
2. Software Version:2010/2014 Firmware Version: 1.7
3. DO NOT update opcom online; otherwise, the device would be damaged!
New OPCOM V1.70 Firmware 2010/2014V Software Function:
1. It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program allows users to read out and clear fault codes, shows you live data and perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
4. Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer,
and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all information available:
Full fault code text description:
1) Full status information (Present, Not present, Intermittent)
2) Users can print out, save, or copy the fault codes to any other application.
From the fault codes window, users can go directly to the measuring blocks window.
3) The program shows measuring block information on many control module, users can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously.
The sample rate is depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Users can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package includes:
1pc x OP COM Interface
1pc x USB Cable
1pc x Software and Drivers CD
If you have any problem, please do not hesitate to contact us.
Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
Recommended products
- DegeTools Pump Air Wedge Airbag Tools,for Windows Install 4 Pack
- Opel ID40 Chip Carbon
- HOT KLOM Cordless Electric Lock Pick Gun Auto Lock Picks Tools Pick Guns Lockpicking Lock Pick Set Locksmith Tools
- Lexus TOY48 3 Button Remote Key Shell(41mm)
