- DegeTools Pump Air Wedge Airbag Tools,for Windows Install 4 Pack
- Opel ID40 Chip Carbon
- HOT KLOM Cordless Electric Lock Pick Gun Auto Lock Picks Tools Pick Guns Lockpicking Lock Pick Set Locksmith Tools
- Lexus TOY48 3 Button Remote Key Shell(41mm)
- Lishi HU64 2 in 1 Mercedes Pick And Reader
- VW Audi HU66 Inner Groove Lock Pick
- BMW X5 Left Door Lock
- Keymam Lock Pick With Light(B) For Sell This Month
- Credit Card Lock Pick Set - Secure Pro Credit Card-Sized Lock Picking Set - Emergency Lockpick Card
- DegeTools Pump Wedge Air Wedge Airbag Tools,for Locksmith 4 Pack
1997 LS400 KEY PROGRAMMING
Key Programming 1. Close all doors.
2. Insert an already programmed master key into the ignition.
3. Turn the key from the OFF to On and back OFF FIVE (5) times.
4. Open and close the drivers door SIX (6) times.
5. Remove the key from the ignition.
6. Insert the new key you want to program into the ignition.
7. Wait 1 minute. The security light will be blinking for this one minute. When it stops blinking your key is programmed. To end programming step on the brake one time.
NOTE: You have 35 seconds to complete steps 1-5 and 10 seconds to complete step 6. If you do not do this procedure fast enough the car will not go into programming mode and your key will not program.
If the security light does not go out after 1 minute start the procedure over again.