- DegeTools Pump Air Wedge Airbag Tools,for Windows Install 4 Pack
- Opel ID40 Chip Carbon
- HOT KLOM Cordless Electric Lock Pick Gun Auto Lock Picks Tools Pick Guns Lockpicking Lock Pick Set Locksmith Tools
- Lexus TOY48 3 Button Remote Key Shell(41mm)
- Lishi HU64 2 in 1 Mercedes Pick And Reader
- VW Audi HU66 Inner Groove Lock Pick
- BMW X5 Left Door Lock
- Keymam Lock Pick With Light(B) For Sell This Month
- Credit Card Lock Pick Set - Secure Pro Credit Card-Sized Lock Picking Set - Emergency Lockpick Card
- DegeTools Pump Wedge Air Wedge Airbag Tools,for Locksmith 4 Pack
Toyota and Lexus Key Specialists
Toyota Key Programming
TYPE1
TOYOTA
4Runner 1999 2000 2001
Avalon 1998 1999 2000 2001 2002 2003 2004
Camry 1998 1999 2000 2001 2002
Highlander 2001 2002 2003
Land Cruiser 1998 1999 2000 2001 2002
MR2 2000 2001 2002 2003 2004 2005
Sienna 1999 2000 2001 2002 2003
Sequoia 2001 2002
Solara 1999 2000 2001 2002 2003
1. Insert an already programmed master key into the ignition. Do not turn.
2. Press and release the gas pedal 5 times.
3. Press and release the brake pedal 6 times.
4. Remove the key from the ignition.
5. Insert the new key you want to program into the ignition.
6. Press and release the gas pedal one time.
7. Wait 1 minute. The security light will be blinking for this one minute. When it stops blinking your key is programmed. To end programming step on brake one time.
NOTE: Look for your security light. This light will guide you during the programming procedure. The security light will go off at Step 1. It will remain off until Step 6. The security light will come on and start to blink after Step 6 until the key is programmed. If the security light comes on after Step 4 STOP the procedure and start over again.
If you perform this procedure too slowly your car will not go into programming mode. If you can not get your car to go into programming mode make sure you are using a master key and not a valet key. If you have a master key then you will probably need to perform this procedure more quickly.
TYPE 2
TOYOTA
Prius 2001 2002 2003
Sequoia 2003 2004 2005
1. Close all doors.
2. Insert an already programmed master key into the ignition.
3. Turn the key from the OFF to On and back OFF FIVE (5) times.
4. Open and close the drivers door SIX (6) times.
5. Remove the key from the ignition.
6. Insert the new key you want to program into the ignition.
7. Turn the key to the ON position.
8. Wait 2 minutes. The security light will be blinking for this one minute. When it stops blinking your key is programmed.
9. Remove your key
10. Open and close the drivers door 1 time.
NOTE: You have 35 seconds to complete steps 1-5 and 10 seconds to complete step 7. If you do not do this procedure fast enough the car will not go into programming mode and your key will not program.
If the security light does not go out after 2 minutes start the procedure over again.
Toyota TOY43 ID4C transponder key
Toyota TOY43 ID4C transponder key
Product Category : TOYOTA
Item No. : KM1268
Product Model : TOY43AT4
Product Weight : 30 g
Retail Price : US$7.99
Integral : 7
Buy 5+ for US$7.59 each
Buy 10+ for US$7.29 each
Buy 20+ for US$6.89 each
TYPE 3
TOYOTA
4Runner 2003 2004 2005
Avalon 2005
Camry 2004 2005 2006 2007
Corolla 2005
Highlander 2004 2005
Land Cruiser 2003 2004 2005
Prius 2004
Sienna 2004
Solara 2004
Tacoma 2005
If you have an already programmed master key, then you can order a keyblaks from my web, to cut it at locksmith and program by yourself. If you do not have an already programmed master key , then You can not program in this key yourself. You need to take your car and your key to either the dealer or to a local locksmith that has the Toyota key programming tools.