- Welcome Guest
- عربة الشراء لك مفرغة
- PROGRAMING TOOLS
- Programing Tools
- Pincode reader
- CLONING TOOLS
- Cloning Tools
- TRANSPONDER KEY
- SUZUKI
- FIAT
- Chrysler
- ZHONGHUA
- Mercedes-Benz
- TOYOTA
- HONDA
- VOLKSWAGEN
- PEUGEOT
- LEXUS
- CITROEN
- GM
- BMW
- FORD
- BUICK
- OPEL
- AUDI
- NISSAN
- MITSUBISHI
- MAZDA
- LOCKSMITH TOOLS
- LISHI Decoder Tools
- LISHI Pick Tools
- ES Pick Tools
- Spacing &Depth Keys
- Car Door open
- House Lock Pick
- REMOTE MASTER
- Remote Clone Expert
- Remote Master
- selflearning remote
- TRANSPONDER CHIP
- Transponder Chip
- House Key Blanks
- KEY BLANKS SHELL
- Chip less key
- Flip key shell
- TOYOTA Remote Key Shells
- LEXUS Remote key shells
- HONDA Remote Key Shells
- BMW Remote Key Shells
- Chrysler Remote Key Shell
- LOCK
- Fingerprint Lock
- Combination Lock
- Car Lock
- Motor Lock
- Pad Lock
- Door Lock
- KEY CUTTING MACHINE
- GLAND
- CUTTER
- WENXING
- OTHER PRODUCT
- Other Product
- APPURTENANCES
- APPURTENANCES
This machine work for the size 7.50mm
A. Measurement of foot home with key measurement of the depth of the tank pit, and were recorded accordingly.
B. Insert the key with the key device body axis, and rotation at the trough positioning device with the 0 key.
C. First sub-degree scale knob engraved line at 0 degrees will be sub-knob with key inserted and the corresponding device key billet handle.
D. Copy cutting.
1. Will be to the degree of control knob (1) position.
2. By a record number indexing knob (1) corresponds to a scale that measured value (depth): 4 is the button depth control knob to position No. 4.
3. The cutting knife knob with key device inserted inside the body, one hand force to push the index knob inward, cutting the other hand knob clockwise to the direction of rotation of cutting (first slot) to limit the depth and will pulled out knives.
4. Rotary knob on the second sub-degree chutes, according to the same method of cutting, and so on, all seven slots after cutting, will be pulling out knob degrees, remove the key, that is the end of replication. In accordance with its teeth so fast without key key, no power
A. Relaxation measured by measuring the mother key of the depth of the tank pit, and were recorded accordingly.
B. Insert the key with the key device body axis, and rotation at the trough positioning device with the 0 key.
C. First sub-degree scale knob engraved line at 0 degrees will be sub-knob with key inserted and the corresponding device key billet handle.
D. Copy cutting.
1. Will be to the degree of control knob (1) position.
2. By a record number indexing knob (1) corresponds to a scale that measured value (depth): 4 is the button depth control knob to position No. 4.
3. The cutting knife knob with key device inserted inside the body, one hand force to push the index knob inward, cutting the other hand knob clockwise to the direction of rotation of cutting (first slot) to limit the depth and will pulled out knives.
4. Rotary knob on the second sub-degree chutes, according to the same method of cutting, and so on, all seven slots after cutting, will be pulling out knob degrees, remove the key, that is the end of replication.
هذه الآلة لحجم العمل 7.50mm
A. قياس الوطن القدم مع رئيسي قياس عمق الحفرة للدبابات ، وسجلت وفقا لذلك.
B. تضاف الرئيسية مع رئيسي جهاز الهيئة المحور ، والتناوب في الحوض الصغير مع جهاز تحديد المواقع 0 رئيسية.
C. الدرجة الأولى دون مقبض الباب المحفور على نطاق خط 0 درجة سيكون من الباطن مع مقبض الباب الرئيسية وتدرج المقابل أداة التعامل مع المادة الخام الرئيسية.
D. نسخ القطع.
1. وسيكون على درجة من السيطرة على مقبض الباب (1).
2. عدد قياسي من خلال مقبض الباب الفهرسة (1) يقابل نطاق قياس القيمة (عمق) : 4 هو زر التحكم في عمق مقبض الباب لموقف رقم 4.
3. قطع بسكين عقدة رئيسية الجهاز عبارة داخل الجسم ، من ناحية القوة لدفع مؤشر كتلة الداخل ، ومن ناحية أخرى قطع نتوء في اتجاه عقارب الساعة الى اتجاه دوران القطع (الشريحة الأولى) للحد من عمق وانسحبت السكاكين.
4. الدوارة على مقبض الباب الفرعي الثاني درجة المزالق ، وفقا لهذا الأسلوب ، من القطع ، وهكذا دواليك ، وجميع القطع بعد سبع فتحات ، وسيتم سحب مقبض الباب درجات إزالة الرئيسية ، أي أن نهاية تكرارها. وفقا للأسنان بسرعة دون مفتاح رئيسي ، وليس السلطة
أ. الاسترخاء تقاس بقياس الأم الرئيسية للدبابات من عمق الحفرة ، وسجلت وفقا لذلك.
B. تضاف الرئيسية مع رئيسي جهاز الهيئة المحور ، والتناوب في الحوض الصغير مع جهاز تحديد المواقع 0 رئيسية.
C. الدرجة الأولى دون مقبض الباب المحفور على نطاق خط 0 درجة سيكون من الباطن مع مقبض الباب الرئيسية وتدرج المقابل أداة التعامل مع المادة الخام الرئيسية.
D. نسخ القطع.
1. وسيكون على درجة من السيطرة على مقبض الباب (1).
2. عدد قياسي من خلال مقبض الباب الفهرسة (1) يقابل نطاق قياس القيمة (عمق) : 4 هو زر التحكم في عمق مقبض الباب لموقف رقم 4.
3. قطع بسكين عقدة رئيسية الجهاز عبارة داخل الجسم ، من ناحية القوة لدفع مؤشر كتلة الداخل ، ومن ناحية أخرى قطع نتوء في اتجاه عقارب الساعة الى اتجاه دوران القطع (الشريحة الأولى) للحد من عمق وانسحبت السكاكين.
4. الدوارة على مقبض الباب الفرعي الثاني درجة المزالق ، وفقا لهذا الأسلوب ، من القطع ، وهكذا دواليك ، وجميع القطع بعد سبع فتحات ، وسيتم سحب مقبض الباب درجات إزالة الرئيسية ، أي أن نهاية تكرارها.
- View Detail
- VW пультом 1J0 959 753 F
- View Detail
- Mercedes-Benz 3 кнопочным пультом дистанционного Ключевые Shell
- View Detail
- Original 2 Button Mazda Flip Remote Key Shell
- View Detail
- AD900 PRO транспондера ключевых программных средств